ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> System Manager >> Set Configuration Problems
http://www.istechforum.com/YaBB.pl?num=1112300289

Message started by tgoodson on 03/31/05 at 12:18:09

Title: Set Configuration Problems
Post by tgoodson on 03/31/05 at 12:18:09

I am having a problem with getting my set configuration in the TAS tab. I do not have any keys on the bottom of the box (i.e. OK, Apply, etc.) I have the latest version update from 3/25/05. I am having problem with my screens having words "cut off" from being displayed and was going to try and change the viewing resolution, but cannot make the change permanent because of this problem. Does anyone have any suggestions?

Thanks

Title: Re: Set Configuration Problems
Post by tgoodson on 05/13/05 at 06:23:33

I figured this one out on my own. Evidently you cannot set the resolution and the DPI setting to Large. When I did this, the OK and Cancel buttons on the bottom of the Window disappeared. I am running at 1280X1024 with the EVO/DBA screeen size set to the same and the DPI setting WAS (Large 120%) This setting caused the problem. I then entered a Custom DPI Setting of 110% and it fixed the problem.