ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> Manufacturing >> Allocated qty stuck on 0
http://www.istechforum.com/YaBB.pl?num=1136382502

Message started by ehadesh on 01/04/06 at 05:48:22

Title: Allocated qty stuck on 0
Post by ehadesh on 01/04/06 at 05:48:22

V 99.2

Yesterday, when looking up a part number, the allocated quantity is shown at zero even though they are allocated. The allocated quantity flashes if you step through the parts via F7 or F8, but when you press enter on the part number, it comes up zero. If you press the ALLOC button, it says there are none allocated.

Ran MM-O to see if that fixed it. It didn't, if anything it set all the allocated quantities to zero according to the MM-O printout.

Today, when taking out a work order, receiving a Btrieve B-2 error on WOBOM.B. The work order appears on the WO listing LW-E, but when you try to print a pick list, it prints the header, but no parts. Also, WOBOM.B was looked at via Maintain Database and the work order items from today do not appear, but ones from yesterday do. Re-indexing WOBOM.B currently to see if that fixes the problem.

Any other ideas?

Thanks
Eric Hadesh
Michigan Instruments, Inc.
MIS Manager

Title: Re: Allocated qty stuck on 0
Post by Lynn Pantic on 01/04/06 at 06:15:39

No, Error 2 usually means some sort of file damage that would require a reindex. You are on the right track. WOBOM is the file used for Allolations so that aspect of it makes sense.