ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> Manufacturing >> wo-c will not print wo #
http://www.istechforum.com/YaBB.pl?num=1151354997

Message started by eti on 06/26/06 at 12:49:57

Title: wo-c will not print wo #
Post by eti on 06/26/06 at 12:49:57

When we changed to evo the print travlers would not print the dash # (2356- ). so i tried edit forms thinking one of the boxes was covering up that field. I just tried doing it again moved the boxes around and now it wont print either number the work order or the dash. Any suggetions

Title: Re: wo-c will not print wo #
Post by cathyh on 06/26/06 at 13:07:58

MAKE SURE THE "VISIBLE" BOX IS CHECKED FOR EACH OF THE FIELDS......

Title: Re: wo-c will not print wo #
Post by eti on 06/26/06 at 13:16:11

The visible box is checked. I don't get it.

Title: Re: wo-c will not print wo #
Post by Lynn Pantic on 06/26/06 at 14:06:21

Copy the RTX to RTM for the format you are using to be sure you have the latest

Title: Re: wo-c will not print wo #
Post by cathyh on 06/26/06 at 14:11:59

You don't say what version of Evo you are running. A while back I had that problem with the WO suffix. Ibelieve I fixed it by adding it to the RTM, but I am not certain; what ever was done worked.
ARe you sure, that when you print the traveler, the RTM that you pick is the one that you modified? Have you tried using different RTM's?
--------------------
Better idea Lynn!

Title: Re: wo-c will not print wo #
Post by eti on 06/29/06 at 08:54:44

Lynn Pantic wrote:

Copy the RTX to RTM for the format you are using to be sure you have the latest

I'm not sure what you mean. can you explain more detail .

Title: Re: wo-c will not print wo #
Post by Karen Mason on 06/29/06 at 10:51:48

At one time, this field used an incorrect format when calling out the datafield name. Can't remember, but I think it had dashes instead of periods.
Should be MTWO.WIP.WOPRE

Title: Re: wo-c will not print wo #
Post by eti on 06/29/06 at 11:09:09

Karen Mason wrote:

At one time, this field used an incorrect format when calling out the datafield name. Can't remember, but I think it had dashes instead of periods.
Should be MTWO.WIP.WOPRE

Mine is mtwo_wip_wosuf. How do I change it?

Title: Re: wo-c will not print wo #
Post by eti on 06/29/06 at 11:25:38

I changed the field to read. MTWO.WIP.WOPRE and now the work order # prints but no dash #.

Title: Re: wo-c will not print wo #
Post by Karen Mason on 06/29/06 at 11:31:37

OOPS, SORRY.

When you look at your RTM, you can see where the base number is and the suffix number. The base number data field should be MTWO.WIP.WOPRE. The suffix or dash numbers should be mtwo.wip.wosuf.

Title: Re: wo-c will not print wo #
Post by eti on 06/29/06 at 11:37:51

So how should I enter it in the field.
(MTWO.WIP.WOPRE.MTWO.WIP.WOSUF) IS THIS RIGHT?

Title: Re: wo-c will not print wo #
Post by eti on 06/29/06 at 11:47:17

Okay now it works. The problem was the first field was wrong it was MTWO_WIP_WOPRE and the other field read MULTI FIELD. So I changed the first to MTWO.WIP.WOPRE and the second to MTWO.WIP.SUF.
Thanks for the help.

Title: Re: wo-c will not print wo #
Post by Karen Mason on 06/29/06 at 11:50:42

No, they are two separate fields.
When you look at the RTM click on the field that needs corrected, then change it.
Mine shows:
Work Order: then there is a box with the base #, that should be MTWO.WIP.WOPRE, then there is a tiny box with a dash in it. That separates the prefix and the suffix. Then there is a box with the actual dash number, that should be mtwo.wip.wosuf.

Title: Re: wo-c will not print wo #
Post by cathyh on 06/29/06 at 12:40:42

I remember now that I have seen this in another rtm that wasn't printing a field that was on the rtm. I remembered from the symposium that the t6 forms needed dots instead of dashes. So if you see this happening again, check the dots and dashes!