ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> Problem Reports - Repeatable >> Bug in Options
http://www.istechforum.com/YaBB.pl?num=1329768848

Message started by GasGiant on 02/20/12 at 13:14:08

Title: Bug in Options
Post by GasGiant on 02/20/12 at 13:14:08

We have one product that has an option that adds a phantom assembly. It adds the two parts in the phantom to the BOM correctly, but the quantities don't backflush properly. The BOM correctly shows 3 or 4 of each part from the phantom, but backflushing always issues 1 of each.

Note that for this product we process the WO's with the Multi WO program.

Title: Re: Bug in Options
Post by Lynn_Pantic on 02/20/12 at 21:10:06

You say the "BOM" shows the correct amount. What about the WO BOM (as seen in the materials screen in WO-A?

Title: Re: Bug in Options
Post by GasGiant on 02/21/12 at 05:27:03

Yes, WOBOM was what I meant, sorry.

Title: Re: Bug in Options
Post by GasGiant on 02/28/12 at 06:30:09

Is this verified? Or are options not supposed to be used with Type B items?

Title: Re: Bug in Options
Post by cellis on 03/02/12 at 12:26:23

I'm having a problem with the "Options" as well. We have a product that is set up to allow us to choose what type of material the final product will be made from. I was entering a quote with that part, the features & options window opens, I choose the options and click "GO" and get sent back to the line item screen of the form....only the options won't print. Sometimes when I get back to the line item screen the original line item entry is no longer there. We're currently on EVO. It was working fine in DBA, but we just switched to EVO so this is just my first experiences with this type of entry on the EVO side. Curious if anyone else is having a similar issue of if we're just blessed with all the good stuff. ;-)

Title: Re: Bug in Options
Post by GasGiant on 03/15/12 at 08:30:05

Still an ongoing issue

Title: Re: Bug in Options
Post by cellis on 03/15/12 at 10:02:28

Thanks for the "heads up".

Title: Re: Bug in Options
Post by cellis on 04/17/12 at 13:43:51

Is there a resolution to the features and options bug issue? Some of our items are set up with options such as paint and color. I've had to take them out of all of the inventory items because we can't get the EVO to work at order entry. It locks up and/or creates extra line items AND duplicate sales orders sometimes.

Title: Re: Bug in Options
Post by shadowcaster on 05/02/12 at 09:16:31

I use F and O for most of my orders.
My boms have an array of option boms and some type b Items on them
If I have any I always put the type B boms at the end of my main bom after all the options.
Some of the options have B boms others have type A boms

When multi- level converting the sales order to wo's if I change the qty of an item sometimes it messes up and multiplies all of the items on an option bom by the changes qty.

I no longer change qty at conversion I just make what it needs and adjust them after. >:(
This doesn’t happen on every order just some orders and on some items.

also I have issues where it sometimes will put an item in the wrong pick slip.
usually its the last item on the order. seems like it just randomly will add it to some other pick slip.

Title: Re: Bug in Options
Post by TMC Trailers on 06/18/12 at 19:18:49

We are also having this problem, is this being sorted?

Title: Re: Bug in Options
Post by shadowcaster on 08/23/12 at 12:34:06

Anything on this ?

Title: Re: Bug in Options
Post by TMC Trailers on 08/28/12 at 01:53:49

We have changed the form to T6SOA and it works there

Title: Re: Bug in Options
Post by cellis on 12/03/12 at 07:27:54

We are on EVO 8/7/12 sp1 and are trying to re-establish the options feature and it seems to be pulling the options and features properly, but it isn't printing on the acknowledgement. It just reads like this"

options:
end options:

The description isn't printing. Is there a setting we need to use in the form or some way to get the description to print on the paperwork?

Thanks!

Title: Re: Bug in Options
Post by shadowcaster on 01/21/13 at 16:42:01

Now my WO boms created with F and O sales orders are blowing up.
Some of the options are multiplying the item qty 2 4 6 10 times.
Ive seen this happen when the WO bom are created but this happened when we did issues I think.

I'm thinking its something to do with issueing by the list function.

Just fixed 30 items on 4 wo boms. Not fun.

anyone else seeing this ?

Title: Re: Bug in Options
Post by shadowcaster on 01/25/13 at 18:21:40

Lynn send me a New SO-N file.

some of you with F and O issues may need this fix too.

Title: Re: Bug in Options
Post by TMC Trailers on 01/27/13 at 21:17:54

Lynn can I please have the new file too? Our features and options still doesn't work with the latest upgrade.

Thanks