ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> Problem Reports - Repeatable >> DC-A & DC-G - Crazy Time Calculations - Can't edit
http://www.istechforum.com/YaBB.pl?num=1343227430

Message started by TGerak on 07/25/12 at 07:43:50

Title: DC-A & DC-G - Crazy Time Calculations - Can't edit
Post by TGerak on 07/25/12 at 07:43:50

We are test driving the DC module with a subset of our people. We're running it in our QA Lab, since they all have computers at their workstations. It's not uncommon for them to clock into multiple jobs simultaneously and work on them as a batch. Sometimes, we are seeing the Evo generated "Time-out" time created when the second job is clocked into is returning a strange time. I have one employee who was clocked out by Evo at 39:30:00. I know what the number should be, but DC-G will not accept the correct Time-out.

Anyone else encounter this?

Title: Re: DC-A & DC-G - Crazy Time Calculations - Can't
Post by Lynn_Pantic on 07/25/12 at 07:54:06

Check your shift buffers. If you clock in and out during the buffer, the start time advances to the buffer so the stop time adds 24 hours.

Title: Re: DC-A & DC-G - Crazy Time Calculations - Can't
Post by TGerak on 07/25/12 at 08:03:18

Thanks for the prompt reply. We have "Enable Employee Shift Start/Stop" set to "N". Would it still look at shifts?

Title: Re: DC-A & DC-G - Crazy Time Calculations - Can't
Post by Lynn_Pantic on 07/25/12 at 08:10:11

Yes, regardless of that setting the program looks at when shifts start and stop.

Title: Re: DC-A & DC-G - Crazy Time Calculations - Can't
Post by TGerak on 07/25/12 at 08:12:18

Perfect. I've set the buffers to match the defined shifts. Now I can edit the bogus times.

Thanks!