ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> Problem Reports - Repeatable >> IN-B adding or changing a link
http://www.istechforum.com/YaBB.pl?num=1403706959

Message started by shadowcaster on 06/25/14 at 07:35:59

Title: IN-B adding or changing a link
Post by shadowcaster on 06/25/14 at 07:35:59

IN-B 06-20-14

latest update

adding a non evo link is deleting existing links.
adding a 2nd link deletes the 1st link

I need to enter a rush job with about 50 new parts and they will all have links so I'm stopped till this is fixed

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 06/26/14 at 05:23:04

are we there yet ?

Anyone else having this issue

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 06/27/14 at 04:17:35

>:(

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 06/27/14 at 04:22:12

adding 1 link worked
add 2 links and I get no links

this is really cramping my work flow

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 07/08/14 at 10:08:20

I can't enter notes in T6

I can't enter links in T7

100% latest software

Its hot in here I have jobs backed up (finally)
and EVO is really letting me down

about to loose it

Title: Re: IN-B adding or changing a link
Post by David Waldmann on 07/15/14 at 04:47:30

Not sure what you mean by "non-Evo" link.

If you mean, the original Links - once you enable Evo Links you really shouldn't be using the original Links. Not sure if what you're seeing is a side effect or not, but there is a warning about using them.

If you mean, links not in the system directory - I haven't noticed anything, and I just did a test with three links on different drives than Evo and everything stayed put.

???

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 07/15/14 at 08:25:22

I had Allen work on it and he made some changes.

I haven't used it enough yet to tell of its fixed all the way

I don't used evo links as when I turned it on my evo link file was over 200 meg and my system went crazy.

Id like t use it but no one offered any explanation of what was wrong so Ive lived without it.

is an evo links file of over 200 meg normal ? my classic links file is 12 meg so to me the conversion went bad.

however I have no way of knowing

Title: Re: IN-B adding or changing a link
Post by David Waldmann on 07/15/14 at 08:31:37

Ok, I see.

What is the evo links file name?

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 07/15/14 at 08:47:05

ISLINKS.B

Title: Re: IN-B adding or changing a link
Post by David Waldmann on 07/15/14 at 08:58:50

Ours is 30MB for just over 4000 links.

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 07/15/14 at 09:34:55

maybe I need to reinitialize the file

re index my links

and then do the conversion again

Title: Re: IN-B adding or changing a link
Post by Kelloggs on 07/15/14 at 09:50:33

that ISLINKS table is a real piece of work.

:'(

Kelloggs

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 07/15/14 at 10:14:59

Not sure why its so convoluted

seems like it could be laid out in a more logical fashion without combining fields into gibberish.

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 07/25/14 at 15:11:50

BTW this issue is still unresolved.

:'(

Title: Re: IN-B adding or changing a link
Post by shadowcaster on 08/09/14 at 09:41:02

This is now resolved.

one of the patches did it. not sure what one because I was using the t6 program for a while.

its sooo nice to be back on the t7 IN-B

Thanks !