ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> Evo Menu & Evo-ERP >> Screen displays
http://www.istechforum.com/YaBB.pl?num=1050080649

Message started by Mike_Habich on 04/11/03 at 11:04:09

Title: Screen displays
Post by Mike_Habich on 04/11/03 at 11:04:09

Screens don't display well for me in TAS6Evo. I use 640x480 on a 1280x960 monitor. On the TAS6 screens, line spacing is larger, making the screen about 1/3 taller. The field display font is tiny and hard to read, but the field display is wider, overlapping labels in some cases.

Has anyone found settings to clean this up?

Title: Re: Screen displays
Post by Lynn_Pantic on 04/11/03 at 11:10:31

Go to System Manager - TAS 6 - C - Set Configuration and click the User Options tab, check the setting for RUN form display size.

Title: Re: Screen displays
Post by Mike_Habich on 04/11/03 at 11:41:29

Sure, I tried that. The 640x480 screen is a good size; the larger sizes wouldn't allow multiple windows, and I'd have to move a few feet away from the monitor.

640x480 is OK with old DBA, but the fields overlap the labels in Evo (try IN-A). Vertical line spacing is too large, and wastes space. I was able to get bigger fonts for just the fields; that helped a bit.

Title: Re: Screen displays
Post by danj on 04/16/03 at 11:19:15

Somewhat related but different,

I run a dual monitor system. The windows the pop up at the various locations (not DBA windows but control/system messages) insist on centering in the middle of the desktop, effectively splitting the message across two monitors.
Not a major problem, but.......

Title: Re: Screen displays
Post by David Waldmann on 04/16/03 at 12:59:41

Try cutting down the "Row Pixels" to 13 or 14. Also, for most screens you could probably reduce "Video Rows" to 28 or 27.