ISTech Support Forum

ISTech Support Forum
http://www.istechforum.com/YaBB.pl
Evo-ERP and DBA Classic >> Manufacturing >> phantom line in QC
http://www.istechforum.com/YaBB.pl?num=1596827557

Message started by JamesO on 08/07/20 at 12:12:37

Title: phantom line in QC
Post by JamesO on 08/07/20 at 12:12:37

We have a phantom line that we need to delete in QC. What table do I check. I forget.

Thank you,

Jimmy

Title: Re: phantom line in QC
Post by Lynn_Pantic on 08/08/20 at 18:53:08

Might be BKQCMSTR or BKAPPOL - where do you see it?

Title: Re: phantom line in QC
Post by JamesO on 08/12/20 at 08:11:27

We only see it in PO-J-B.

Also: we tried the following recently. I backed up the BKQCMSTR and BKAPPOL I first edited the BKQCMSTR. There were 2 entries form 7/20/20 that Heather said could be the culprit. I deleted one and she rechecked the PO-J-B. Problem still there. I deleted the 2nd record, she checked same issue. I then copied/restored table back. Next We looked at he BKAPPOL and found an entry that I deleted, she checked, same problem. I then copied/Restored table back.

Title: Re: phantom line in QC
Post by prophet on 08/12/20 at 12:25:29

I believe if you populate the BKQC.OUT.DATE in the BKQCMSTR file with a date it should come off the PO-J-B report.