Welcome, Guest. Please Login.
05/25/25 at 19:15:00
News:
Home Help Search Login


ISTech Support Forum › Evo-ERP and DBA Classic › System Manager ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Set Configuration Problems (Read 431 times)
tgoodson
Member
**




Posts: 56
Gender: male
Set Configuration Problems
03/31/05 at 12:18:09  
I am having a problem with getting my set configuration in the TAS tab. I do not have any keys on the bottom of the box (i.e. OK, Apply, etc.) I have the latest version update from 3/25/05. I am having problem with my screens having words "cut off" from being displayed and was going to try and change the viewing resolution, but cannot make the change permanent because of this problem. Does anyone have any suggestions?
 
Thanks
Back to top
 
 
Tommy Goodson
Zyntech Systems, Ltd.
Manufacturer of Fuel Control Equipment
http://www.zyntechsystems.com
Evo-ERP 2007.1 05/25/09 update
installed 06/01/09
Email WWW   IP Logged
tgoodson
Member
**




Posts: 56
Gender: male
Re: Set Configuration Problems
Reply #1 - 05/13/05 at 06:23:33  
I figured this one out on my own. Evidently you cannot set the resolution and the DPI setting to Large. When I did this, the OK and Cancel buttons on the bottom of the Window disappeared. I am running at 1280X1024 with the EVO/DBA screeen size set to the same and the DPI setting WAS (Large 120%) This setting caused the problem. I then entered a Custom DPI Setting of 110% and it fixed the problem.
Back to top
 
 
Tommy Goodson
Zyntech Systems, Ltd.
Manufacturer of Fuel Control Equipment
http://www.zyntechsystems.com
Evo-ERP 2007.1 05/25/09 update
installed 06/01/09
Email WWW   IP Logged
Pages: 1
Send Topic Print
ISTech Support Forum › Evo-ERP and DBA Classic › System Manager ‹ Previous topic | Next topic ›

ISTech Support Forum » Powered by YaBB 2.1!
YaBB © 2000-2005. All Rights Reserved.

Valid XHTML Valid CSS Powered by Perl Source Forge