We're looking into starting to print inventory labels through Evo.  From the documentation, it appears that 1-up uses 3 1/2 by 15/16.  I'm researching this size, and have only found dot matrix printers.  Is there a thermal label printer out there with a USB interface that will print this size?  1-up is appealing because we would not waste labels with partial sheets in the 3-up format.  Otherwise, we'd look into 3-up with Avery 5160 on existing laser printers that we have.
 
Any suggestions would be greatly appreciated.

Thank you, Lynn.

We have Zebra 2844 scattered all over the place and we use them for many different things.
 
From inventory tags 3x1
to shipping 4x6 labels
 
For the money they can't be beat.  
 
I purchase used/old UPS models from HippoVariety  
http://www.hippodeals.com/zebraprinters.html
 
 
 
 

anyone have any luck making anything other than a 3 x1 inventory tag ?
 

Where I am having trouble is determining which printer I need for a certain label size.  The 1 x 2.63 label size is what I'm shooting for, in a roll, to print to a 1-up thermal label printer.  Any suggestions?

We purchased a Zebra 2844 and Avery 9170 (same size as 5160 and 8160) 1 x 2 5/8 labels.  This is just s small roll of 300 labels to test with.  We're having trouble getting the label set up properly in Evo.  It looks like our label template wants to print horizontal (2 5/8 x 1) but the label is vertical (1 x 2 5/8).  Any words of wisdom for a newbie getting labels set up properly?  Should I just buy 3 x 1 labels, or try to fix the template to print on the 1 x 2 5/8?
 
Thanks,
Tim

Thanks to Lynn, Mike, and BurrKing_Mfg.  We finally got labels printing correctly using a refurb Zebra 2844 from hippodeals, 3x1 labels from discountthermallabels.com and lots of trial and error in editing T6ING1.rtm.