ISTech Support Forum - phantom line in QC

Welcome, Guest. Please Login.

	05/07/24 at 08:38:08 News: \| IS Tech Support \| Evo~ERP \| Evo Wiki \| Forum \|

ISTech Support Forum › Evo-ERP and DBA Classic › Manufacturing

‹ Previous topic | Next topic ›

Pages: 1

phantom line in QC (Read 374 times)

JamesO Member Posts: 66	phantom line in QC 08/07/20 at 12:12:37 We have a phantom line that we need to delete in QC. What table do I check. I forget. Thank you, Jimmy
Back to top	IP Logged

Lynn_Pantic Administrator evolution (n) - gradual change to a different form Posts: 5681	Re: phantom line in QC Reply #1 - 08/08/20 at 18:53:08 Might be BKQCMSTR or BKAPPOL - where do you see it?
Back to top	Lynn Pantic IS Tech Support lynn@istechsupport.com IP Logged

JamesO

Member

Posts: 66

Re: phantom line in QC
Reply #2 - 08/12/20 at 08:11:27

We only see it in PO-J-B.

Also: we tried the following recently. I backed up the BKQCMSTR and BKAPPOL I first edited the BKQCMSTR. There were 2 entries form 7/20/20 that Heather said could be the culprit. I deleted one and she rechecked the PO-J-B. Problem still there. I deleted the 2nd record, she checked same issue. I then copied/restored table back. Next We looked at he BKAPPOL and found an entry that I deleted, she checked, same problem. I then copied/Restored table back.

IP Logged

prophet Full Member Posts: 215	Re: phantom line in QC Reply #3 - 08/12/20 at 12:25:29 I believe if you populate the BKQC.OUT.DATE in the BKQCMSTR file with a date it should come off the PO-J-B report.
Back to top	IP Logged

Pages: 1

ISTech Support Forum › Evo-ERP and DBA Classic › Manufacturing

‹ Previous topic | Next topic ›